• Pictured above two double stacks of the ribbon 6685 Line Array Meter Modules. Note ,shown without optional black cloth "Grille Sock". Also available in white finish.  Spec. Sheet

6685 Ribbon Line Array Meter Module

26 lbs. (11.8 kg) Ultra Lightweight and Compact. Easy to transport, safe and cost effective

Modules daisy chain together 1, 2, 3 meter etc. steps. Three high stack is approx. 10 ft high

One module is 1 meter high. 39.75”(101cm) H x 10.5”( 26.5cm)W x 6.5”(16.5cm) D

5 x 8” Push Pull Neodymium Ribbon drivers coupled to extend bandwidth (video shielded)

6 x 6.5” Neodymium Woofers are extremely efficient and triple vented to increase power handling. Heat is also dissipated by the high temp. aluminum V.C. former. The woofers are also conductively cooled through an aluminum channel in the flying hardware.(video shielded)

100 dB 1W/1m SPL,480 W continuous power handling with peaks to 1.25 Kilowatts

Frequency response 80 Hz – 20 kHz - 3 dB recommended x-over frequency 675 Hz

DSP active crossover, Bi-amp LF 12 Ohm load HF 20 Ohm load * optional passive x-over

Ultra low distortion sound! Extremely low moving mass diaphragms for fast transient response

Polyurethane, Aluminum, Baltic Birch, Composite enclosure, ½ circle cylinder can be used as a main or monitor. It's round back can be rotated on the stage floor to the proper face angle.

8 fly points 3/8”-16T min. 5 to 1 safety factor,1.5”steel stand socket & tilt/swivel wall mount

Cabinet is covered with a Neoprene backing material, an esthetically pleasing fabric

“Grille Sock” (White or Black) slips over the system covering everything but the end plates

Capacitive Resonance Chamber Line Source Ribbon for extended length and bandwidth

Teflon gliding feet that nest for stacking, Dual-Lock coupling, optional steel coupling struts

Top and bottom inputs, Speakon & screw terminals (parallel) for connections to next cabinet

Ultra wide horizontal dispersion with “laser beam” verticals that increase gain before feedback

Line Array only -3dB SPL down for 2X distance. A long throw solution for reverberant spaces

Optional “Weather Proof” version, Custom finish **In-Wall version fits within a 3.5” stud depth. 

• Need more bass ? Check out the new high excursion (3"P-P) Neo subwoofer technology at bhivemotor.com.
  It's about low distortion and controlled polar response so start with good transducers!   
• CGN audio labs, 27 N. Wacker drive, Suite 257, Chicago,IL 60606 USA PH 651-460-4783 FAX 707-597-4484